Julabo HE-4 - 2.4. Technical specifications

Operator responsibility – Safety recommendations
10
2.4. Technical specifications
Heating circulators
HE-4 SE-6 SE-12 SE-26
Working temperature range °C
20 … 250
20 ... 300 20 ... 300 20 ... 300
Temperature stability °C
±0.01 ±0.01 ±0.01 ±0.01
Bath opening (WxL) cm
13x15 13x15 22x15 22x30
Bath depth cm
15 20 20 20
Filling volume liters
3 ... 4,5 4,5 ... 6 7,5 ... 12 18 ... 26
Overall dimensions (WxDxH) cm
21x42x40 21x43x44 30x43x47 36x61x47
Weight kg
11 13,5 14,0 27,0
Bridge mounted circulator
SE-Z
Working temperature range °C 20 ... 300
Temperature stability °C ±0.01
Immersion depth max./min. cm 18/9
Overall dimensions (WxDxH) cm 32x17x33
Weight kg 7
HE SE
Mains power connection V/Hz 208-230 / 50/60 208-230 / 50/60
Current draw (at 208 V / 230 V) A 8 / 9 13 / 14
Mains power connection V/ Hz 100-115 / 50/60
Current draw (at 100 V / 115 V) A 9 / 10
All measurements have been carried out at: rated voltage and frequency
ambient temperature: 20 °C bath fluid: water operating temperature: 70 °C
Technical changes without prior notification reserved.
HE SE
Temperature selection digital
via keypad indication on VFD COMFORT-DISPLAY
remote control via PC indication on monitor
Temperature indication VFD COMFORT-DISPLAY
Resolution °C 0.01 0.01
ATC3 INT/EXT °C ±3 / ±9 ±3 / ±9
Temperature control ICC - Intelligent Cascade Control
Heater wattage (at 230 V) kW 2,0 3,0
Heater wattage (at 115 V) kW 1,0 ---
Electronically adj. pump capacity stages 1 ... 4 1 ... 4
Flow rate at 0 bar l/min 22 ... 26 22 ... 26
Max. pressure at 0 liters bar 0.7 0.7
Max. suction at 0 liters bar 0.4 0.4
Electrical connections: See page 11
Ambient temperature °C 5 … 40 5 ... 40
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30