Do you have a question about the JUMO AQUIS 500 pH and is the answer not in the manual?
Measurement Range pH | 0 to 14 pH |
---|---|
Inputs | 1 |
Display | LCD |
Operating Temperature | 0 to 50 °C |
Protection Type | IP65 |
Resolution pH | 0.01 pH |
Protection Class | II |
Input Signal | pH |
Power Supply | 24 V AC/DC |
Dimensions | 96 x 96 x 115 mm |
Measured Variables | pH, temperature |
Temperature Compensation | Automatic |
Weight | approx. 400 g |
Identifies the product model and the purpose of this manual.
Explains the meaning of various symbols used for warnings and notes in the manual.
Introduces the instrument's functions, applications, and modular design.
Visual representation of the instrument's inputs, outputs, and internal functions.
Explains how to identify the instrument's model and specifications from its label.
Lists items included in the package and available optional accessories.
Essential safety and technical instructions for electrical installation.
Details various connection types (pH, ORP, ISFET) and their terminal mappings.
Guidelines for selecting location and general mounting procedures.
Describes surface, pipe, and DIN rail mounting options.
Instructions for installing the instrument into a panel cutout.
Identifies the instrument's physical controls and the LC display.
Explains principle of operation, levels, manual, simulation, and hold modes.
Accessing and modifying operator, administrator, basic settings, and calibration.
A recommended quick procedure for initial instrument setup.
Practical examples for measurement types and final configuration steps.
Procedures for 1, 2, and 3-point calibration of pH electrodes.
Calibration methods for antimony, ORP, and NH3 sensors.
Describes the setup program's features and how to connect the instrument to a PC.
A guide to identifying and resolving common problems with the instrument.
Lists and explains all instrument parameters, settings, and functions.
Detailed specifications, housing details, and conformity marks.