Need help?Do you have a question about the JUMO IMAGO 500 and is the answer not in the manual?
General| Input Types | Thermocouples, RTD |
|---|---|
| Output Types | Relay, Analog |
| Communication Protocols | RS-485, Modbus |
| Power Supply | AC 110 to 240 V, DC 24 V |
| Protection Class | IP65 (front) |
Detailed overview of the JUMO IMAGO 500's features and specifications.
Provides wiring diagrams for connecting inputs, outputs, and interfaces.
Overview of the instrument's front view, displays, and controls.
Configuration options for analog inputs, including probe types and values.
Configuration settings for controller type, action, manual mode, and output ranges.
Defines the instrument's function (fixed-setpoint, program controller, generator) and ramp functions.
Explains the different switching functions for limit comparators (Ik1-Ik8).
Configures analog outputs, including signal types and range settings.
Assigns functions to logic inputs, limit comparators, and logic formulas.
Explains self-optimization methods for PID/PI controllers.
To Next Page
