JUMO DICON touch - Order Details

4 Identifying the device version
12
4.1 Order details
(1) Basic type
703571 JUMO DICON touch - two-channel process and program controller with RS485 interface
(2) Version
8 Standard with default settings
9 Customer-specific configuration (specifications in plain text)
(3) National language of display texts
01 German
02 English
03 French
(4) Input IN10
00 Not used
10 Analog input (universal)
(5) Input IN11
00 Not used
10 Analog input (universal)
(6) Outputs OUT3/4
00 None
11 One relay (changeover contact)
12 Two relays (N/O contact)
13 One solid-state relay 230 V, 1 A
14 One logic output DC 0/22 V max. 30 mA
1
15 Two logic outputs 0/12 V, 20 mA
16 One analog output
17 Two PhotoMOS® relays®
2
20 Two solid state relays 230 V, 1 A for motor actuator (double slot: OUT3/4 and OUT7/8)
a
(7) Outputs OUT5/6
00 None
11 One relay (changeover contact)
12 Two relays (N/O contact)
13 One solid-state relay 230 V, 1 A
14 One logic output 0/22 V, max. 30 mA
a
15 Two logic outputs 0/12 V, 20 mA
16 One analog output
17 Two PhotoMOS® relays
20 Two solid state relays 230 V, 1 A for motor actuator (double slot: OUT5/6 and OUT9/10)
a
(8) Outputs OUT7/8 (only available for assignment with module 20 on OUT3/4)
00 None