JUNCTEK
Inspection
When you get a new KH-F series coulometer, it is recommended that you
inspect the meter according to the following steps.
Inspect the Packaging
If the packaging has been damaged, do not dispose the damaged packaging
or cushioning materials until the shipment has been checked for completeness
and has passed both electrical and mechanical tests. The consignor or carrier
shall be liable for the damage to the meter resulting from shipment. We would
not be responsible for free maintenance/rework or replacement of the meter.
Check the Contents
Please check the contents according to the packing lists. If the meter is
damaged or incomplete, please contact your JUNCTEK sales representative.
KH-F series of Measurement module
KH-F series of display module
KH-F series of the Sampler
Inspect the Meter
In case of any mechanical damage, missing parts, or failure in passing the
electrical and mechanical tests, contact your JUNCTEK sales representative.
To Next Page
Loading...
General