JUNCTEK KL-F Series - APP Interface Introduction

Hangzhou Junce Instruments Co., Ltd.
7
(2) Sampler interface
Connect with the sampler interface of the measurement module for
current measurement.
3. APP interface introduction
Figure 2-3-1 KL-F series APP interface
Table 2-3-1 KL-F series APP interface instructions
No.
Instruction
No.
Instruction
1
Interface title bar
10
Connect the
Bluetooth switch
2
Device ID
11
Product model
3
Communication
address
12
Control state
4
Measured voltage
value
13
Measured current
value
5
Battery remaining
capacity
14
Power