JUNCTEK KL-F Series User Manual

Hangzhou Junce Instruments Co., Ltd.
2
Chapter 1 Overview
1. Brief Introduction
KL-F series DC voltage and current meter/battery coulomb meter is a new
type of coulomb meter that can measure various parameters such as voltage,
current, power, charge and discharge capacity, watt-hour, time, etc., and can
also set parameters to achieve over-voltage protection , under-voltage
protection, over-current protection, over-power protection, over-temperature
protection and other protection functions. The meter can automatically identify
the direction of the current, and can monitor the battery capacity in real time.
During use, connect the sampler in series to the negative wire of the battery
according to the wiring diagram, and then connect the sampler and
measurement module through the data line, install the matching mobile phone
APP, view the measured data through Bluetooth, control the meter and
firmware upgrade through the mobile phone APP.
2. Dimension
The measurement module
The hole position
100A sampler
100A sampler hole position

JUNCTEK KL-F Series Specifications

General

Brand	JUNCTEK
Model	KL-F Series
Category	Measuring Instruments
Language	English