Jung Home - Page 21

Parameters Setting options,
Default setting
Explanations
Presentation
function
Off, on
Default setting: off
The presentation function is used in com-
bination with a linked JUNG HOME pres-
ence detector. The presentation function
can be switched on or off with the app or
a linked JUNG HOME push-button.
With the presentation function switched
on, the light is switched off and move-
ments detected by a JUNG HOME pres-
ence detector are prevented from switch-
ing on the light for a defined locking time.
Not only sensor signals from JUNG
HOME presence detectors, but also
sensor signals from JUNG HOME motion
detectors, switch-on and switch-off com-
mands via extensions, wireless control
with the app and other JUNG HOME
devices restart the locking time.
The presentation function is automatically
ended at the end of the locking time. Al-
ternatively, the presentation function can
be switched off manually.
Locking time
presentation
function
3 ... 240 min
Default setting: 3 min
Defines the locking time during which the
light remains off with the "presentation
function" switched on.
Sensor signals from JUNG HOME pres-
ence detectors and JUNG HOME motion
detectors, switch-on and switch-off com-
mands via extensions, wireless control
with the app and other JUNG HOME
devices restart the locking time.
Dimming range
(min-max)
0 ... 100%
Default setting: 5 ...
100%
Defines the dimming range. The minimum
dimming value depends mostly on the
lamps used and should be determined by
trial and error.
Switch-on
brightness
5 ... 100% or last value
Default setting: 100%
If a value is entered, the light is switched
to this brightness by a switch-on com-
mand.
Last value:
When the light is switched on,
it is switched to the brightness set last.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
21 / 26
32405203 24.02.2023
J0082405203