EasyManua.ls Logo

Jung Home - Additional settings for Venetian blind inserts

Jung Home
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameters Setting options,
Default setting
Explanations
Night light func-
tion brightness**
5 ... 100%
Default setting: 20%
Defines the reduced switch-on brightness
to which the light is switched with the
night function activated. The entry in per-
cent applies to the maximum brightness
of the dimming range.
Behaviour after
mains voltage
returns
Switched off, switched
on, previous status,
parametrised value
Default setting: switched
off
Behaviour of the load output after the
mains voltage returns.
Disabling func-
tion (restraint)**
Deactivated, continu-
ously ON, continuously
OFF, for fixed time ON/
OFF
Default setting: deactiv-
ated
The disabling function switches the load
output to the desired status and blocks it
against control by the motion sensor, ex-
tension operation, time programs and
wireless control with the app and other
JUNG HOME devices. The lock applies
for an adjustable time or until the dis-
abling function is deactivated again.
** Available by update in the future: You can find notes on updates and dates at
www.jung.de/JUNGHOME
Additional settings for Venetian blind inserts lj
Parameters Setting options,
Default setting
Explanations
Operating mode Roller shutter
Venetian blind
Awning
Default setting: Roller
shutter
Shutter: A shutter or an awning is con-
trolled for which the Fabric-stretching
function is required.
Venetian blind: A Venetian blind is con-
trolled.
Awning: An awning is controlled for which
the Fabric-stretching function is required.
Running time 1s ... 10min
Default setting: 2 min
Absolute time it takes for the Venetian
blind, shutter or awning to move from re-
tracted to extended end position.
This entry is required to display the cur-
rent position of the Venetian blind, shutter
or awning and perform precise position
movements. This entry is therefore made
in the app directly after the JUNG HOME
push-button has been added to a project -
but can be subsequently corrected.
JUNG HOME push-button 1-gang, JUNG HOME push-button 2-gang
23 / 26
32405203 24.02.2023
J0082405203

Related product manuals