EasyManuals Logo

Jungheinrich EJC B16 User Manual

Jungheinrich EJC B16
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
03.11 EN
44
3.3 Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline, without the brakes applied or with a raised load / load
handler is dangerous and is strictly prohibited.
XAlways park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
XAlways fully lower the mast and forks.
XSelect a place to park where no other people are at risk of injury from lowering
forks.
Parking the truck securely
Procedure
Fully lower the load handler.
Turn off the key switch and remove the key.
For CanCode, press the O key.
Press the Emergency Disconnect.
The truck is parked.
3.4 Battery discharge monitor
Z The standard setting for the battery discharge indicator / discharge monitor is
based on standard batteries. When using maintenance-free or special batteries the
display and cutout points of the battery discharge monitor must be set by
authorised specialist personnel. If this adjustment is not made the battery may
become damaged through excessive depletion.
If the residual capacity falls below the required level, lifting is inhibited. An alternating
display (51) appears. Lifting is only released when the battery connected is at least
70% charged.
03.11 EN
44
3.3 Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline, without the brakes applied or with a raised load / load
handler is dangerous and is strictly prohibited.
XAlways park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
XAlways fully lower the mast and forks.
XSelect a place to park where no other people are at risk of injury from lowering
forks.
Parking the truck securely
Procedure
Fully lower the load handler.
Turn off the key switch and remove the key.
For CanCode, press the O key.
Press the Emergency Disconnect.
The truck is parked.
3.4 Battery discharge monitor
Z The standard setting for the battery discharge indicator / discharge monitor is
based on standard batteries. When using maintenance-free or special batteries the
display and cutout points of the battery discharge monitor must be set by
authorised specialist personnel. If this adjustment is not made the battery may
become damaged through excessive depletion.
If the residual capacity falls below the required level, lifting is inhibited. An alternating
display (51) appears. Lifting is only released when the battery connected is at least
70% charged.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich EJC B16 and is the answer not in the manual?

Jungheinrich EJC B16 Specifications

General IconGeneral
BrandJungheinrich
ModelEJC B16
CategoryTrucks
LanguageEnglish

Related product manuals