To Next Page

To Previous Page

C 3

0108.USA

Identification plate:

We highly recommend that the data from the identification plate be copied onto the

diagram below to ensure that this important data is available to the operator and that

these instructions are not inadvertently used with any other product.

The user is responsible for confirming that all identification plates and caution and in-

struction markings are in place and legible (refer to section “Identification points and

data plates“ in chapter D).

QwW Industrial truck use is subject to certain hazards that cannot be completely

eliminated by mechanical means. Those risks can, however, be minimized by

the exercise of intelligence, care and common sense. Operators must,

therefore, be competent, careful, physically and mentally fit, and thoroughly

trained in the safe operation of the equipment and load handling.

for type "E" industrial trucks with type "E" battery

Built in compliance with ASME B 56.1

C 3