Jungheinrich ERC 214 User Manual

8.1.7 Delete individual user codes
Requirements
– To prepare the truck for operation, see page 115.
Procedure
• Press the O key (77).
• Enter the valid master code with the digit keys.
When you enter the valid master code the LED
(76) flashes green.
• Enter the parameters 0-0-3 with the digit keys.
• Confirm with the SET key (75).
The LEDs (73,76) flash green.
• Enter the user code to be deleted with the digit keys.
• Confirm with the SET key (75).
The LEDs (74,76) flash green.
• Enter the user code to be deleted again with the digit keys.
• Confirm with the SET key (75).
Wait until the LED (76) flashes green. The user code is now deleted.
• Press the O key (77).
The truck is switched off and the LED (76) is lit red.
• Check that the user code has been deleted:
• Switch the truck on with the user code to be deleted, see page 115
After entering the user code the LED (76) flashes red and the truck remains
switched off.
• Press the O key (77).
The truck remains switched off and the LED (76) is lit red.
75
72
73
74
77
76
122
04.19 en-GB

Jungheinrich ERC 214 Specifications

General

Brand	Jungheinrich
Model	ERC 214
Category	Forklifts
Language	English