Specifying a configuration code:
Setting Description
1st digit
0
– Travel program 1 is blocked for the user code
selected
1
– Travel program 1 is enabled for the user code
selected
2nd digit
0
– Travel program 2 is blocked for the user code
selected
1
– Travel program 2 is enabled for the user code
selected
3rd digit
0
– Travel program 3 is blocked for the user code
selected
1
– Travel program 3 is enabled for the user code
selected
4th digit
0
– When the truck has been switched on with the
selected user code, no travel program is activated
1
– When the truck has been switched on with the
selected user code, travel program 1 is activated
2
– When the truck has been switched on with the
selected user code, travel program 2 is activated
3
– When the truck has been switched on with the
selected user code, travel program 3 is activated
Z
The default setting for the travel program configuration code is:
1-1-1-2.
Meaning:
Travel programs 1, 2 and 3 are enabled.
When the truck has been switched on with the selected user code, travel program 2
is activated
129
04.19 en-GB
To Next Page
Loading...
