Jungheinrich ERC 214 User Manual

8.11.4 Adding a new access code
Requirements
– The truck is switched on, see
page 158.
Procedure
• Press the key below the "Settings"
symbol (93).
• Press the key below the "Edit access
code" symbol (99).
The set-up code is requested.
• Enter the set-up code using the
keypad (60).
All access codes are shown on the
display unit (55).
• Press the key below the "Add"
symbol (100).
• Enter a new access code using the
keypad (60).
Z
The new access code must be
different from existing access codes.
• Press the key below the "Confirm"
symbol (96).
The new access code is shown on the
display unit (55).
Z
If the new access code has been
entered incorrectly, delete it, see
page 161, and enter the correct
access code.
To return to the main menu, press the
key below the "Back" symbol (97).
A new access code has been added.
60
93
96
55
97
100
99
160
04.19 en-GB

Jungheinrich ERC 214 Specifications

General

Brand	Jungheinrich
Model	ERC 214
Category	Forklifts
Language	English