Jungheinrich ERC 214 - Page 163

8.11.5 Deleting an access code
Requirements
– The truck is switched on, see page 158.
Procedure
• Press the key below the "Settings"
symbol (93).
• Press the key below the "Edit access
code" symbol (99).
The set-up code is requested.
• Enter the set-up code using the keypad
(60).
All access codes are shown on the
display unit (55).
• Select the access code to be deleted
using the key below the "Down
selection" symbol (101).
• Press the key below the "Delete"
symbol (95).
The access code has been deleted.
• To return to the main menu, press the
key below the "Back" symbol (97).
60
93
55
97
95
101
99
161
04.19 en-GB