Jungheinrich ERC 214 - Page 68

Ite
m
Control/display ERC
212/214/216
212z/214z/
216z
Function
55 Display unit
(2-inch display)
o
Display for:
– Battery charge status
– Battery capacity
– Service hours
– Travel program
– Warning indicators
– Event messages
Soft keys under
the display unit
Selection of:
– Travel program
– Options
Replaces the key switch
– Truck release by entering master and
access codes
56 Fork lifting button
t
– Raises the lift mechanism at an adjustable
speed.
57 Fork lowering
button
t
– Lowers the lift mechanism at an
adjustable speed.
10 Charge status
indicator
t
– Indicates the charge/discharge status of
the battery.
CanDis
o
Display instrument for:
– Battery charge status
– Battery discharge status
– Service hours
– Event messages
– Parameter settings
11 Key switch and
key
t
– Activates the industrial truck by switching
on the control voltage.
– Removing the key prevents the truck from
being switched on by unauthorised
personnel.
58 CanCode
o
Replaces the key switch
– Activates the truck via a card/transponder
– Travel program selection
– Code setting
– Parameter setting
59 ISM access
module
o
Replaces the key switch
– Activates the truck via a card/transponder
– Displays readiness for operation
– Operational data logging
– Data exchange with card/transponder
66
04.19 en-GB