The Curve Control option helps the driver to operate the truck safely taking into
consideration safety regulations. When cornering, the maximum travel speed is
adapted to the steer angle.
Anti-roll back device for slow travel on inclines
If the truck does not have sufficient speed to travel up an incline, it may roll back.
Rolling back is detected by the truck's controller and the truck brakes to a halt
immediately.
oReduced speed when the load handler is fully loweredI
When the load handler is fully lowered the truck can only travel at reduced speed.
The load handler must be raised in order to use the maximum available speed.
Industrial trucks with a folding standing platform and moving tiller
We distinguish between two travel modes:
– Travel in pedestrian mode
– Travel in rider mode
84
04.19 en-GB
To Next Page
Loading...
