Jungheinrich ERC 214 User Manual

4.9.1 Raising the load handler
Requirements
– Prepare the truck for operation, see page 74.
Procedure
Press the “Raise load handler”
button (56) until you reach the desired
lift height.
NOTICE
Risk of material damage to the
hydraulic unit
When you have reached the mechanical
stops of the load handler, do not press the
"Raise load handler" button any more.
Otherwise the hydraulic unit could suffer
material damage.
Z
The lift/lower speed can be infinitely
controlled via the movement of the
button (approx. 8 mm).
Short stroke = slow lift / lower
Long stroke = fast lift / lower
The load handler is raised.
57
56
63
64
64
63
56
57
Use as an elevated work table
The raised load handler can be used as an elevated work table when the truck is
switched off, see page 105.
94
04.19 en-GB

Jungheinrich ERC 214 Specifications

General

Brand	Jungheinrich
Model	ERC 214
Category	Forklifts
Language	English