Jungheinrich ERC 214 User Manual

4.9.2 Lowering the load handler
Requirements
– Prepare the truck for operation, see page 74.
Procedure
• Press the "Lower load handler" button (57) until you reach the desired lift height.
Z
The lowering speed can be infinitely adjusted via the travel of the button (approx.
8 mm).
Short switch stroke = slow lower
Long switch stroke = fast lower
The load handler is lowered.
4.9.3 Raising the wheel arms
Z
ERC 212z-216z only
Requirements
– Prepare the truck for operation, see page 74.
Procedure
• Press the “support arm raise” button (63) until you reach the desired support arm
lift.
The support arms are raised.
4.9.4 Lowering the wheel arms
Z
ERC 212z-216z only
Requirements
– Prepare the truck for operation, see page 74.
Procedure
• Press the “support arm lower” button (64) until you reach the desired support arm
lift.
The support arms are lowered.
95
04.19 en-GB

Jungheinrich ERC 214 Specifications

General

Brand	Jungheinrich
Model	ERC 214
Category	Forklifts
Language	English