11
08.11 EN
A Correct Use and Application
1 General
The industrial truck described in the present operating instructions is designed for
lifting, lowering and transporting load units.
It must be used, operated and serviced in accordance with the present instructions.
Any other type of use is beyond the scope of application and can result in damage to
personnel, the industrial truck or property.
2 Correct application
NOTE
The maximum load and load distance are indicated on the load chart and must not be
exceeded.
The load must rest on the load handler or be lifted by an attachment approved by the
manufacturer.
The load must rest on the back of the fork carriage and centrally between the forks.
– Lifting and lowering of loads.
– Transporting lowered loads over short distances.
– Do not travel with a raised load (>30 cm).
– Do not carry or lift passengers.
– Do push or pull load units.
– Occasional towing of trailer loads.
– When towing trailer loads the load must be secured on the trailer.
– The permissible trailer load must not be exceeded.
To Next Page
Loading...
Need help?
General
