show ptp lock-status
Syntax show ptp lock-status
Release Information Command introduced in Junos OS Release 12.2.
Command introduced in Junos OS Release 17.3 for the QFX Series.
Description (ACX Series, MX80, MX240, MX480, MX960 routers, and QFX Series switches) Display
information about the lock status of the slave. The output verifies whether the slave is
aligned to the grandmaster (master clock) or not.
Options detail—Display detailed information about the lock status of the slave.
Required Privilege
Level
view
Related
Documentation
IEEE 1588v2 PTP Boundary Clock Overview on page 234•
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
• Precision Time Protocol Overview
List of Sample Output show ptp lock-status on page 2946
show ptp lock-status (ACX Series) on page 2946
show ptp lock-status detail (ACX Series) on page 2946
show ptp lock-status detail (with IPv6 addresses for PTP master/slave) on page 2946
Output Fields Table 211 on page 2945 lists the output fields for the show ptp lock-status command. Output
fields are listed in the approximate order in which they appear.
Table 211: show ptp lock-status Output Fields
Field DescriptionField Name
State of the slave clock with respect to its master clock:
• Freerun
• Holdover
• Phase Aligned
• Acquiring
• Initializing
• Freq locked
Lock State
Time offset information of a slave clock with respect to its master clock. Precision of this time offset
is 1 nanosecond.
Phase offset
2945Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
