Juniper AX411 Configuration And Deployment Guide

Copyright © 2011, Juniper Networks, Inc. 3
APPLICATION NOTE - Configuring and Deploying the AX411 Wireless Access Point
Introduction
Juniper Networks
®
has introduced a wireless access point solution that is integrated into Juniper Networks SRX
Series Service Gateways. This new product line allows for a simple deployment of Wi-Fi networks in the branch while
leveraging the advanced capabilities of Juniper’s services gateways for AP Management. SRX Series for the branch
includes the ability to provide advanced security services like unified threat management (UTM), intrusion prevention
system (IPS), firewalling, unified access control, and VPNs.
Scope
The purpose of this application note is to provide an overview of the different deployment scenarios for Juniper’s
Wi-Fi solution for the branch. This application note begins by detailing the capabilities of the Juniper Networks
AX411 Wireless Access Point and how it is configured. The final sections of this application note provide some typical
deployment scenarios and their configurations.
Design Considerations
SRX Series Services Gateways are used to monitor and configure the AX411 access points. These devices support
Power over Ethernet (PoE) and can be powered by SRX Series gateways that support PoE. Alternatively, an external
power supply is provided with each access point that can be used when PoE is not available.
Hardware Requirements
• Juniper Networks SRX Series for the branch (SRX100 line and SRX200 line of services gateways, and the SRX650
Services Gateway)
Soware Requirements
• Juniper Networks Junos
®
operating system release 10.0 or later
Description and Deployment Scenario
AX411 Features
The AX411 access point provides support for a wide range of features and protocols targeted for small to medium
sized deployments in branch offices. For larger deployments of more then 4 access points, or where location services
are desired, the Juniper Networks WLA and WLC Product line are recommended. The following table summarizes some
of the most important characteristics of this product.
Table 1: AX411 Feature Summary
FEATURE DETAILS
Dual radio support Yes
PHY protocols supported 802.11a, 802.11b, 802.11g, and 802.11n
802.11h spectrum and transmit power management extensions Yes
802.11d specification for operation in additional regulatory domains Yes
802.11e quality of service enhancements Yes
Number of virtual access points supported Up to 16 per radio (32 total)
Gigabit Ethernet ports 1
Console port 1
802.1q support Yes
Authentication Local and RADIUS
MAC authentication Yes
HTTP redirect support Yes
Access point clustering support Yes, in Junos OS 10.1 and later.

Juniper AX411 Specifications

General

Brand	Juniper
Model	AX411
Category	Wireless Access Point
Language	English