Juniper EX4100 Guide

Step 3: Keep Going
IN THIS SECTION
What's Next | 14
General Informaon | 15
Learn With Videos | 15
Congratulaons! You’ve completed the inial steps to get your EX4100 and EX4100-F switch up and running. Let’s keep
going and learn more about what you can do with the switch.
What's Next
If you want to Then
Download, acvate, and manage your soware licenses to
unlock addional features for your EX series switch.
See Acvate Junos OS Licenses in the Juniper Licensing Guide
Congure, monitor, and troubleshoot various interfaces
installed on the switch
Interfaces Fundamentals for Junos OS
Congure essenal user access and authencaon features for
your system
User Access and Authencaon Administraon Guide for Junos
OS
Install and upgrade Junos OS and related soware Junos OS Soware Installaon and Upgrade Guide
See, automate, and protect your network with Juniper Security Visit the Security Design Center
Get hands-on experience with the procedures covered in this
guide
Visit Juniper Networks Virtual Labs and reserve your free
sandbox. You’ll nd the Junos Day One Experience sandbox in
the stand alone category. EX Series switches are not virtualized.
In the demonstraon, focus on the virtual QFX device. Both the
EX Series and QFX Series switches are congured with the
same Junos commands.
14

Juniper EX4100 Specifications

General

Model	EX4100
Category	Switch
Layer	Layer 2/3
Power Consumption	Varies by model and configuration
PoE	Optional
Management	Web UI, CLI, SNMP
Operating Temperature	0°C to 45°C
Input Voltage	100-240V AC
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing
DC Power Input	-48V DC
JUNOS OS	Yes
Security Features	ACLs
Layer 2 Features	VLAN, RSTP, MSTP, LACP
Layer 3 Features	Static routing, OSPF
QoS	8 queues per port