Juniper EX4300 Manual

PoE/PoE+ Ports10/100/1000BASE-T PortsModel
048EX4300-48T
4848EX4300-48P
4824
(plus 24 100/1000/2500/5000/10000BASE-T
ports)
EX4300-48MP
032 100/1000BASE-X portsEX4300-32F
In this guide, we show you how to install an AC-powered EX4300 switch with the fan modules and power supplies
preinstalled. If you need instructions for installing fans, power supplies, and optional uplink modules, see the EX4300
Switch Hardware Guide.
Install the EX4300
IN THIS SECTION
What’s in the Box? | 3
What Else Do I Need? | 3
Install the EX4300 Switch in a Two-Post Rack | 3
2

Juniper EX4300 Specifications

General

Model	EX4300
Virtual Chassis	Yes, up to 10 members
Layer 3 Routing	Yes
10GBASE SFP+ Ports	4
Jumbo Frames	9216 bytes
MAC Address Table Size	32, 000
Operating System	Junos OS
Uplink Ports	4 x 10GBASE SFP+
Power Supply	AC or DC options
Operating Temperature	0°C to 45°C (32°F to 113°F)
Input Voltage	100-240V AC
Operating Relative Humidity	5 to 90% RH, non-condensing
Management Options	CLI, Web UI, Junos Space
Redundancy	Yes, power supply and fans
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Ports	24 or 48