EasyManua.ls Logo

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 User Manual

Juniper JUNOS 10.1 - RELEASE NOTES REV 4
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Flexible Ethernet encapsulation (JUNOS Release 10.0R2)
Graceful Routing Engine switchover (GRES) (JUNOS Release 10.0R2)
Ingress differentiated (JUNOS Release 10.0R2)
Differentiated Services code point rewrite (DSCP) (JUNOS Release 10.0R2)
Intelligent oversubscription (JUNOS Release 10.0R2)
Integrated routing and bridging (IRB) (JUNOS Release 10.1R1)
Intermediate System-to-Intermediate System (IS-IS) (JUNOS Release 10.0R2)
Internet Group Management Protocol (IGMP) (excludes snooping) (JUNOS
Release 10.0R2)
IPv4 (JUNOS Release 10.0R2)
IP multicast (JUNOS Release 10.0R2)
Label Distribution Protocol (LDP) (JUNOS Release 10.0R2)
Labeled-switched path (LSP) accounting, policers, and filtering (JUNOS Release
10.0R2)
LAN-PHY mode (JUNOS Release 10.0R2)
Layer 2 frame filtering (JUNOS Release 10.0R2)
IEEE 802.3ad link aggregation (JUNOS Release 10.0R2)
Link Aggregation Control Protocol (LACP) (JUNOS Release 10.0R2)
Local loopback (JUNOS Release 10.0R2)
MAC learning, policing (JUNOS Release 10.0R2)
Multiple tag protocol identifiers (TPIDs), accounting, and filtering (JUNOS
Release 10.0R2)
Multiprotocol Label Switching (MPLS) (JUNOS Release 10.0R2)
Nonstop active routing (NSR) (JUNOS Release 10.0R2)
Multitopology routing (MTR) (JUNOS Release 10.0R2)
Open Shortest Path First (OSPF) (JUNOS Release 10.0R2)
Packet mirroring (JUNOS Release 10.0R2)
Quality of service (QoS) per port: (JUNOS Release 10.0R2)
Eight queues per port
Excess-rate configuration at the traffic-control-profile level
Excess-rate and excess-priority configuration at the queue level
Shaping at the port level
10 New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
JUNOS 10.1 Software Release Notes

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS 10.1 - RELEASE NOTES REV 4 and is the answer not in the manual?

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS 10.1 - RELEASE NOTES REV 4
CategorySoftware
LanguageEnglish

Summary

Contents

JUNOS Software Release Notes for Juniper Networks M Series Multiservice Edge Routers, MX Series Ethernet Service Routers, and T Series Core Routers

Details new features, behavior changes, and issues for JUNOS Release 10.1 on M, MX, and T Series routers.

JUNOS XML API and Scripting

Describes new JUNOS XML API operational request tag elements introduced in JUNOS Release 10.1.

MPLS Applications

Covers new features for MPLS applications, including static LSPs and bypass LSPs.

Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers

Highlights changes in system behavior and CLI usage since the previous release.

Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers

Lists outstanding issues affecting M Series, MX Series, and T Series routers.

Resolved Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers

Details resolved issues related to CoS speed values, rate-limiting, and classifiers.

Known Limitations in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

States that accounting, source-class, and destination-class statements are not supported.

Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

Lists current problems existing in SRX Series and J Series devices.

Hardware Requirements for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

Recommends using only Juniper Networks transceivers for SRX and J Series interfaces.

Dual-Root Partitioning Scheme Documentation for SRX Series Services Gateways

Explains the dual-root partitioning scheme for SRX Series devices.

Dual-Root Partitioning Scheme

Explains the dual-root partitioning scheme for SRX Series devices.

Recovery of the Primary JUNOS Software Image with Dual-Root Partitioning Scheme

Explains how to restore the primary JUNOS Software image if it fails to boot.

Maximizing ALG Sessions

Explains how to increase session capacity for RTSP, FTP, TFTP, and TCP Proxy ALGs.

Using Dual Chassis Cluster Control Links: Upgrade Instructions for the Second Routing Engine

Provides instructions for upgrading the second Routing Engine in a dual chassis cluster.

JUNOS Software Release Notes for EX Series Switches

Details new features in JUNOS Release 10.1 for EX Series switches.

Changes in Default Behavior and Syntax in JUNOS Release 10.1 for EX Series Switches

Highlights changes in system behavior and CLI usage for EX Series switches.

Limitations in JUNOS Release 10.1 for EX Series Switches

Lists limitations in JUNOS Release 10.1R3 for EX Series switches.

Outstanding Issues in JUNOS Release 10.1 for EX Series Switches

Lists outstanding issues in JUNOS Release 10.1R3 for EX Series switches.

Resolved Issues in JUNOS Release 10.1 for EX Series Switches

Notes that DHCP snooping database might not be built on EX2200 switches.

Errata in Documentation for JUNOS Release 10.1 for EX Series Switches

No outstanding documentation issues reported for this release.

Upgrade and Downgrade Issues for JUNOS Release 10.1 for EX Series Switches

Details ARP aging time configuration incompatibility.

Related product manuals