EasyManua.ls Logo

Juniper JUNOSE 11.2.X MULTICAST ROUTING User Manual

Juniper JUNOSE 11.2.X MULTICAST ROUTING
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
JunosEâ„¢ Software
for E Seriesâ„¢ Broadband
Services Routers
Multicast Routing Configuration Guide
Release
11.2.x
Published: 2010-06-29
Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X MULTICAST ROUTING and is the answer not in the manual?

Juniper JUNOSE 11.2.X MULTICAST ROUTING Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X MULTICAST ROUTING
CategorySoftware
LanguageEnglish

Summary

CHAPTER 1 Configuring IPv4 Multicast

IPv4 Multicast Overview

Defines IPv4 address types (unicast, broadcast, multicast) and their usage in network communication.

CHAPTER 2 Configuring IGMP

IGMP Overview

Explains IPv4 multicast addresses and IGMP protocol functions and versions.

CHAPTER 3 Configuring PIM for IPv4 Multicast

PIM Dense Mode

Describes PIM dense mode mechanism for dense multicast scenarios.

CHAPTER 4 Configuring DVMRP

CHAPTER 5 Configuring IPv6 Multicast

IPv6 Multicast Overview

Reverse-Path Forwarding

Explains RPF for verifying IPv6 multicast packet reception on the correct interface.

Multicast Packet Forwarding

Describes how routers forward IPv6 multicast packets based on source and group.

CHAPTER 6 Configuring Multicast Listener Discovery

CHAPTER 7 Configuring PIM for IPv6 Multicast

Overview

PIM Sparse Mode

Describes PIM sparse mode features for IPv6, including remote neighbors.

Related product manuals