■
show security alg msrpc portmap
■
show security alg sunrpc portmap
■
The show security alg msrpc object-id-map CLI command has a chassis cluster
node option to permit the output to be restricted to a particular node or to query
the entire cluster. The show security alg msrpc object-id-map node CLI command
options are <node-id | all | local | primary>.
Chassis Cluster
■ On SRX650 devices in chassis cluster mode, the T1/E1 PIC goes offline and does
not come online.
■ The automatic pause timer functionality related to IP address monitoring for
redundancy groups has been removed. Instead, a configurable hold-down-interval
timer for all redundancy groups has been instituted. See the “Configuring a
Dampening Time Between Back-to-Back Redundancy Group Failovers” section
of the JUNOS Software Security Configuration Guide.
■ IP address monitoring on redundancy group 0 is now supported.
■
The chassis cluster redundancy-group group-number ip-monitoring threshold CLI
command has been removed. Instead, use the chassis cluster redundancy-group
group-number ip-monitoring global-threshold command.
■ IP address monitoring on virtual routers is now supported.
124 ■ Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services
Routers
JUNOS 10.1 Software Release Notes
To Next Page
Loading...