Juniper JUNOS 10.1 - RELEASE NOTES REV 4 User Manual

user@host# set wlan access-point mav0 radio 2 radio-options mode ?
Possible completions:
2.4GHz Radio Frequency --2.4GHz-n
bg Radio Frequency -bg
bgn Radio Frequency -bgn
■
On SRX Series devices, the show system storage partitions command now displays
the partitioning scheme details on SRX Series devices.
■ Example 1:
show system storage partitions (dual root partitioning)
user@host# show system storage partitions
Boot Media: internal (da0)
Active Partition: da0s2a
Backup Partition: da0s1a
Currently booted from: active (da0s2a)
Partitions Information:
Partition Size Mountpoint
s1a 293M altroot
s2a 293M /
s3e 24M /config
s3f 342M /var
s4a 30M recovery
■ Example 2:
show system storage partitions (single root partitioning)
user@host# show system storage partitions
Boot Media: internal (da0)
Partitions Information:
Partition Size Mountpoint
s1a 898M /
s1e 24M /config
s1f 61M /var
show system storage
partitions (USB)
■ Example 3:
show system storage partitions (usb)
user@host# show system storage partitions
Boot Media: usb (da1)
Active Partition: da1s1a
Backup Partition: da1s2a
Currently booted from: active (da1s1a)
Partitions Information:
Partition Size Mountpoint
s1a 293M /
s2a 293M altroot
s3e 24M /config
s3f 342M /var
s4a 30M recovery
■ On AX411 Access Points, the possible completions available for the CLI command
set wlan access-point < ap_name > radio < radio_num > radio-options channel
number ? have changed from previous Implementations.
126 ■ Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services
Routers
JUNOS 10.1 Software Release Notes

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Specifications

General

Brand	Juniper
Model	JUNOS 10.1 - RELEASE NOTES REV 4
Category	Software
Language	English