same doubled value after LICU, when the LICU upgrade is performed for JUNOS
Release 10.0R2 to 10.1R2.[PR/491834]
■ On SRX5600 and SRX5800 devices, the shaping rate is not honored during LICU
upgrades. During LICU upgrades, when the secondary node is upgraded to the
primary node, the shaping rate is doubled and continues to be the same doubled
value after the LICU upgrade is finished. [PR/499481]
Class of Service (CoS)
■ J4350 and J6350 devices might not have the requisite data buffers needed to
meet expected delay-bandwidth requirements. Lack of data buffers might degrade
CoS performance with smaller-sized (500 bytes or less) packets. [PR/73054]
■ On J Series devices, with a CoS configuration, when you try to delete all the flow
sessions using the clear security flow session command, the WXC application
acceleration platform might fail over with heavy traffic. [PR/273843]
■ On SRX Series devices, class-of-service-based forwarding (CBF) does not work.
[PR/304830]
■ On SRX3400, SRX3600, SRX5600, and SRX5800 devices, when you change the
scheduler type on the Layer 2 aggregated Ethernet interface, the clear interface
statistics command does not work for the aggregated Ethernet bundle.
[PR/485904]
146 ■ Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
JUNOS 10.1 Software Release Notes
To Next Page
Loading...
Need help?
General
