Juniper QFX5120 Series - Page 7

Figure 4: Secure the QFX5120-32C Switch to the Front Posts of a Rack to Mount the Switch Flush with the Front
Posts of a Rack
g051134
g0xxxxx
Figure 5: Secure the QFX5120-48Y Switch to the Front Posts of a Rack to Mount the Switch Flush with the Front
Posts of a Rack
g022534
Figure 6: Secure the QFX5120-48T Switch to the Front Posts of a Rack to Mount the Switch Flush with the Front
Posts of a Rack
g051262
6. Attach the rear mounting brackets.
If you are mounting a QFX5120-32C switch:
a. Ensure that the chassis is level. Align the holes of the rear mounting (L-shaped) brackets with the threaded holes
in the rear post of the rack. Align the bottom hole in both the mounting brackets with a hole in each rack rail. Align
the bottom hole in both the rear mounting brackets with the bottom hole in the front mounting brackets.
b. Secure the rear mounting brackets to the rear post of the rack by using screws appropriate for your rack (see
Figure 7). Tighten the screws.
7