Juniper SRX650 - Diagnostics

• 1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides the following
Operation, Administration, and Maintenance (OAM) loopback diagnostics:
•
OAM F4 far loopback test
•
OAM F4 near loopback test
•
OAM F5 far loopback test
•
OAM F5 near loopback test
Related
Documentation
• 1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
• 1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
• 1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
• 1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
• 1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
• 1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
49Copyright © 2015, Juniper Networks, Inc.
Chapter 5: 1-Port ADSL2+ Mini-Physical Interface Module