Juniper SSG 520M Security Policy

Juniper Networks SSG 520M and SSG 550M Security Policy
16
• Label #12 applied vertically from the power supply cover extending on to the
removable cover.
• The top of the removable cover, extending on to the side of the chassis opposite the
power supply, as shown in figure 6. For the SSG 520M, this is label #14. For the SSG
550M, this is label #13.
The removable cover on both the SSG520M and SSG550M is a single piece covering the top of the
unit and is fastened to the chassis by multiple retaining screws. Figure 7 depicts the device with the
tamper seals removed and the cover partially removed. Please note that there are no user serviceable
components inside the device.
Figure 7: SSG 350M with the cover slid back

Juniper SSG 520M Specifications

General

Brand	Juniper
Model	SSG 520M
Category	Gateway
Language	English