Jura E4 - Hot water; Caffè Barista and lungo Barista (optionally with J.O.E.); Permanently setting the amount of water for the cup size

4 Preparation
14
T
 Place a cup under the hot-water spout�
T
 Turn the switch to the
x
position�
Hot water flows into the cup�
T
 Turn the switch to position
°
to stop the preparation of hot
water�
The JURA app (J�O�E�
®
) offers two additional products for you to
choose from: caffè Barista and lungo Barista�
Example:Lungo Barista
T
 Place a cup under the hot-water spout�
T
 In the JURA app (J�O�E�
®
), tap the product ‘Lungo Barista’�
T
 Follow the instructions in the app�
It is easy to make permanent settings for the amount of water for all
speciality coffees according to the cup size� Adjust the amount once
as shown in the following example� Every time you prepare a drink
in the future, this amount of water will be dispensed�
Example:Proceed as follows to permanently set the amount of
water for one coffee�
T
 Place a cup under the coffee spout�
T
 Press the
o
button for about 2 seconds.
The coffee flows into the cup�
T
 Press any button as soon as there is sufficient coffee in the cup�
Preparation stops� The set amount of water for one coffee is
permanently stored�
E You can alter this setting at any time by repeating the above
procedure�
Hot water
Caffè Barista and lungo
Barista (optionally with
J.O.E.
®
)
Permanently setting the
amount of water for the cup
size