Jura E4 - Cleaning the bean container

7 Maintenance
22
T
 Turn the switch to the
x
position�
Water flows repeatedly out of the hot-water spout� The process
stops automatically� The sss £ symbols flash from left to
right�
T
 Turn the switch to position
°
�
The descaling operation is continued�
The ü symbol lights up�
T
 Empty the drip tray and coffee grounds container and put them
back into the machine�
The u symbol lights up�
T
 Remove the water tank and rinse it thoroughly�
T
 Fill the water tank with fresh, cold water and reinsert the tank�
The sss £ symbols flash from right to left�
T
 Place a receptacle under the hot-water spout�
T
 Turn the switch to the
x
position�
Water flows repeatedly out of the hot-water spout� The process
stops automatically� The sss £ symbols flash from left to
right�
T
 Turn the switch to position
°
�
The descaling operation is continued�
The ü symbol lights up�
T
 Empty the drip tray and coffee grounds container and put them
back into the machine�
The sss £ symbols flash 3 times in quick succession�
E If the descaling operation stops unexpectedly, rinse the
water tank thoroughly�
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container� These traces may negatively affect
the coffee result� For this reason clean the bean container from time
to time�
T
 Press the On/Off button
Q
to switch the E4 off�
T
 Remove the aroma preservation cover�
T
 Clean the bean container with a soft, dry cloth�
T
 Fill the bean container with coffee beans and close the aroma
preservation cover�
Cleaning the bean container