How to fix insufficient foam from Jura E8 EB's frother?
If the fine foam frother on your Jura Coffee Maker isn't producing enough foam, or if milk sprays out, it's likely that the frother is dirty. Clean the fine foam frother or dismantle and rinse it.
What to do if little water comes out of the Jura Coffee Maker frother?
If little or no water or steam comes out of the fine foam frother of your Jura Coffee Maker and the pump is very quiet, the connector of the fine foam frother may be blocked by milk residues or limescale fragments loosened during descaling. Remove the fine foam frother, unscrew the black connector, clean the connector thoroughly, and then screw the connector back on tightly by hand.
Why does my Jura E8 EB say 'Fill water tank' when it's full?
If your Jura Coffee Maker displays ‘Fill water tank’ even when the tank is full, there is probably a lot of limescale in the water tank. Descale the water tank to resolve this issue.
Why does my Jura E8 EB only drip coffee when brewing?
If the coffee only comes out in drips during preparation with your Jura Coffee Maker, it could be that the coffee is ground too finely, obstructing the system. To resolve this, adjust the grinder to a coarser setting. Alternatively, the water hardness may not have been correctly set, in which case you should perform descaling.
What does ERROR 2 mean on my Jura E8 EB?
If your Jura Coffee Maker displays ‘ERROR 2’ or ‘ERROR 5’, it may be because the machine has been exposed to the cold for an extended period, which disables heating for safety. Warm the machine at room temperature to resolve this.
General| Weight | 9.6 kg |
|---|---|
| Pump Pressure | 15 bar |
| Power | 1450 W |
| Grinder Type | AromaG3 grinder |
| Brand | Jura |
| Model | E8 EB |
| Type | Automatic Coffee Machine |
| Programmable | Yes |
| Water Tank Capacity | 1.9 L |
| Bean Container Capacity | 280 g |
| Display | Color TFT display |
| Coffee Specialties | Espresso, Coffee, Cappuccino, Latte Macchiato, Flat White, Hot Water, Milk Foam |
| Voltage | 230 V |
| Dimensions | 28 × 35.1 × 44.6 cm |
| Milk System | Automatic Milk System (Fine Foam Technology) |
Overview of the machine's display screen and operational buttons for user interaction.
Details on the height-adjustable coffee spout and hot-water nozzle for beverage dispensing.
Information on the milk system and fine foam frother for preparing milk-based beverages.
Location and function of the water tank and bean container for machine operation.
Guidelines for complying with instructions, proper usage, and user limitations for safe operation.
Procedures for handling damage, preventing machine damage, and avoiding electric shock and burns.
Specific instructions regarding children's interaction with the coffee machine.
Steps for setting up the machine, filling the bean container, and determining water hardness.
Guide for the initial startup, language selection, water hardness setting, and filter installation.
Instructions for managing the machine via JURA Cockpit and connecting the milk system.
How to use preselection for speciality coffees like 'Extra Shot' and 'Gemahlener Kaffee'.
Preparing espresso, coffee, and milk-based speciality coffees like cappuccino.
Details on Latte macchiato, cappuccino, Caffè Barista, and Lungo Barista.
Information on preparing 'Espresso doppio' and using ground coffee as an alternative.
How to dispense hot water and adjust the grinder's consistency for optimal coffee.
Steps to adjust coffee strength, amount, and temperature for individual products.
Instructions for switching the coffee machine on and off.
Procedures for filling and maintaining the water tank for daily operation.
Daily and necessary maintenance actions for optimal coffee quality and machine longevity.
Configure language, units, automatic switch-off time, and water hardness.
Customize product names/images and arrange products by preparation frequency using 'Smart mode'.
Options for factory reset, milk system rinsing, and system emptying for maintenance.
View software version details for the coffee machine.
Procedures for rinsing the coffee system, milk system, and cleaning the fine foam frother.
Instructions for inserting and changing the CLARIS Smart filter cartridge.
Steps for descaling the main machine and the water tank to remove limescale buildup.
Cleaning the bean container and other components to ensure optimal performance and hygiene.
Explains messages appearing on the start screen, their causes, and required actions.
Interprets messages and symbols shown in the Cockpit, guiding maintenance actions.
Steps to empty the machine's system to protect it from frost during transport.
Guidelines for disposing of old machines in an environmentally neutral way.
JURA's contact details, website for support, and general contact information.
Information on EU directives compliance and a disclaimer about potential technical changes.
To Next Page
