Preparing and using for the first time
‘System is filling’
‘Empty drip tray’
T
Empty the drip tray and coffee grounds container and put them
back into the machine.
T
Place one receptacle under the coffee spout and another under
the fine foam frother.
‘Rinse the coffee system’
‘Rinse the milk system’
The start screen is displayed. Your E is ready for use.
You can manage your E with the JURA Cockpit. Press the f but-
ton to enter the JURA Cockpit.
Symbol Meaning
c
‘Maintenance status’ section
f
‘Machine setting’ section
h
‘Smart mode’ active
$
Filter mode
Your E creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of –°C. We would therefore recommend using
a milk cooler or a milk container.
T
Remove the protective cover from the fine foam frother.
T
Connect the milk pipe to the fine foam frother.
E Your E is equipped with the HP milk system.
T
Connect the other end of the milk pipe to a milk container or a
milk cooler.
E8
E8
Managing your E – the
JURA Cockpit
c
Connecting milk
To Next Page
Loading...
