For your safety
cloth rather than a wet one, and protect it from
prolonged exposure to water splash. The E
must not be cleaned with a jet of water.
U
The E is not suitable for installation on a
surface where a jet of water can be used.
U
Do not touch the spouts during operation. Use
the handles provided.
U
Optionally, your E can be remotely operated
using mobile devices. When preparing a prod-
uct or initiating a maintenance programme,
make sure that other people are not put at risk –
for example, through contact with the spouts.
U
Be careful to ensure that the fine foam frother
is correctly installed and clean, otherwise the
fine foam frother (or parts of it) may come
loose.
Danger of burns,
scalding and injury
To Next Page
Loading...
