3
E6/E60 – Quick Reference Guide
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
Precondition: The start screen is displayed.
T Press the ‘ P ’ button.
T Press the ‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button.
T Press the ‘Next’ button.
‘Clean the milk system’ / ‘Milk system cleaner’
T Remove the milk pipe from the milk container or carton.
T Pour 250 ml of fresh water into a receptacle and add 1 capful
of milk system cleaner.
T Immerse the milk pipe in the receptacle.
T Place a receptacle under the fine foam frother.
T Press the ‘Next’ button.
As soon as the machine has heated up, ‘Switch open’
appears.
T Turn the switch to the x position.
‘Milk system is being cleaned’ appears and the fine foam fro-
ther and the milk pipe are cleaned.
‘Switch close’
T Turn the switch to the ° position.
‘Clean the milk system’
T Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the fine foam
frother once more.
T Press the ‘Next’ button.
‘Switch open’
T Turn the switch to the x position.
Cleaning the fine foam
frother
CAUTION
To Next Page
Loading...
Need help?
General
Weight and Dimensions
