5
E6/E60 – Quick Reference Guide
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Switch open’
T Place a receptacle (at least 300 ml) under the fine foam fro-
ther.
T Turn the switch to the x position.
‘Filter is being rinsed’, water flows out of the fine foam fro-
ther.
Rinsing of the filter stops automatically after approximately
300 ml. ‘Switch close’ appears on the display.
T Turn the switch to the ° position.
The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
E Once the filter cartridge stops working (depending on the
water hardness setting), the JURA will prompt you to change
the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition: The start screen is displayed. The filter symbol at the
bottom of the display lights up red.
T Remove and empty the water tank.
T Turn the filter cartridge anticlockwise and remove it along
with the extension from the water tank.
Changing the filter
To Next Page
Loading...
Need help?
General
Weight and Dimensions
