Jura E6 Quick Reference Guide

2
E6/E60 – Quick Reference Guide
E6/E60 – Quick Reference Guide
J
These short instructions do not replace the ‘E6/E60 Instructions for
Use’. Make sure you read and observe the safety information and
warnings first in order to avoid hazards.
You can start coffee system rinsing manually at any time.
Precondition: The start screen is displayed.
T Place a receptacle under the coffee spout.
T Press the ‘ c ’ button (white Maintenance symbol).
T Press the ‘Rinse the coffee system’ button to start the rinse
operation.
‘Machine is rinsing’, water flows out of the coffee spout. The
operation stops automatically. The start screen is displayed.
After each milk preparation, the JURA prompts you to perform a milk
system rinse.
Precondition: ‘Rinse the milk system’ is displayed.
T Place a receptacle under the fine foam frother.
T Press the ‘ c ’ button (red Maintenance symbol).
‘Switch open’
T Turn the switch to the x position.
‘Milk system is being rinsed’appears and the fine foam fro-
ther is rinsed.
The rinse stops automatically. ‘Switch close’ appears on the
display.
T Turn the switch to the ° position.
The start screen is displayed.
Rinsing the machine

Jura E6 Specifications

General

Product type	Espresso machine
Certification	TUV
Built-in grinder	Yes
Capacity in cups	16 cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.9 L
Coffee beans capacity	280 g
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Color name	Platina
Control type	Buttons, Rotary
Display type	TFT
Product color	Black, Platinum
Drip/spout adjustment	Vertical
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0 W
Ristretto making	No
Cable length	1.1 m
Pump pressure	15 bar

Weight and Dimensions

Depth	439 mm
Width	280 mm
Height	351 mm
Weight	9800 g