6
E6/E60 – Quick Reference Guide
T Fit the filter cartridge extension on top of a new CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Saved’ appears briefly on the display. The machine has
automatically detected that you have just changed the filter
cartridge.
‘Switch open’
T Place a receptacle (at least 300 ml) under the fine foam fro-
ther.
T Turn the switch to the x position.
‘Filter is being rinsed’, water flows out of the fine foam fro-
ther.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300 ml. ‘Switch close’ appears on the display.
T Turn the switch to the ° position.
The start screen is displayed.
The JURA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
E If you are using a CLARIS Smart filter cartridge, you will not be
prompted to descale.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
Descaling the machine
J
CAUTION
To Next Page
Loading...
Need help?
General
Weight and Dimensions
