Jura E80 Quick Reference Guide

2
E8/E80/E800 – Quick Reference Guide
E8/E80/E800 – Quick Reference Guide
J
These short instructions do not replace the ‘E8/E80/E800 Instruc-
tions for Use’. Make sure you read and observe the safety informa-
tion and warnings first in order to avoid hazards.
You can start coffee system rinsing manually at any time.
T Place a receptacle under the coffee spout.
T Press the ‘Pc’ button.
T Press the ‘>’ button.
T Press the ‘Rinse the coffee system’ button to start the rinse
operation.
‘Machine is rinsing’, water flows out of the coffee spout. The
operation stops automatically.
After each milk preparation, the E8 prompts you to perform a milk
system rinse.
E In programming mode, you can set whether the milk system
rinsing is to be prompted 10 minutes after preparation or initi-
ated automatically (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Milk system rinsing’).
E This chapter applies to the professional fine foam frother and
the fine foam frother.
Precondition:‘Rinse the milk system’ is displayed.
T Place a receptacle under the fine foam frother.
T Press the ‘Pc’ button.
T Press the ‘>’ button.
T Press the ‘Rinse the milk system’ button to start the rinse
operation.
‘Milk system is being rinsed’ appears and the fine foam
frother is rinsed. The operation stops automatically.
Rinsing the machine
Rinsing the fine foam
frother

Jura E80 Specifications

General

Power	1450 W
Width	28 cm
Product Type	Automatic Coffee Machine
Pump Pressure	15 bar
Number of Grinders	1
Programmable Water Volume	Yes
Water Tank Capacity	1.9 L
Bean Container Capacity	280 g
Coffee Grounds Container Capacity	16 portions
Adjustable Coffee Spout Height	Yes
Programmable Coffee Strength	Yes
Milk Frother	Yes
Display	Yes