Jura ENA Micro Series User Manual

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
ENA Micro line / IMPRESSA A line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontage_ENA_Micro_EN.docx
L:\Geräte\Linie_A\A5_OT\Schulungsunterlagen\E\Demontag
e_ENA_Micro_EN.docx
Date:
Rev. G:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
06.10.2011
20.02.2014
21.03.2012
19.09.2012
14.11.2012
27.03.2013
17.09.2013
Page 12/26
41. Pull down carefully the snap-lock of the multi-
valve support and remove the multi-valve
42. Pull out the pump of the pump support
43. Pull with a small screw driver into the slot to
release the lateral interlock and remove it
44. Remove the transformer
45. Variation when print and pump is removed:
Release snap-lock of the tank base.
46. Turn at the same time the tank base
(bayonet lock).

Jura ENA Micro Series Specifications

General

Bean Container Capacity	4.4 oz
Pump Pressure	15 bar
Power	1450 W
Pulse Extraction Process (P.E.P.)	Yes
Series	ENA Micro
Voltage	120 V
Color Options	Black, Silver
Milk Frother	No
Special Features	Intelligent Pre-Brew Aroma System
Water Tank Capacity	36.8 oz