EasyManua.ls Logo

Jura IMPRESSA A9 One Touch - Regular Maintenance; Switching off the Machine; 4 Permanent Settings in Programming Mode; Replacing Products on the Start Screen

Jura IMPRESSA A9 One Touch
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
4 Permanent settings in programming mode
pt
es
pt
es
fr
ru
en
de
Regular maintenance
Carry out the following maintenance actions
regularly or as required:
U
In the interests of hygiene, we recommend
changing the milk pipe on a regular basis
(approximately every 3 months). Replacement
pipes are available from specialized dealers
(JURA original accessory set for frothers).
U
Clean the inside of the water tank, e.g. with a
brush. Further information about the water
tank is provided in these instructions for use
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top
and bottom of the cup platform. If this
happens, clean the cup platform.
Switching off the machine
When the IMPRESSA is switched off, the system is
automatically rinsed if a specialty coffee has been
prepared. If milk has been prepared, the milk
system is rinsed too.
T Place a receptacle under the dual spout.
T Press the On/Off button Q.
‘Machine is rinsing’, ‘Milk system is being
rinsed’, the system rinses itself. The
operation stops automatically. Your
IMPRESSA is switched off.
E Empty the water tank after switching off.
E When the IMPRESSA is switched off with the
On/Off button, the machine does not
consume standby energy.
9
4 Permanent settings in
programming mode
Touch the Menu symbol t for about 2 seconds to
view the list of maintenance programs and switch
to programming mode. The following settings can
be made:
U
Deactivate start screen
U
Water hardness
U
Units
U
Automatic switch-off
U
Language
You can also add your four favourite products to
the start screen (see next chapter).
Replacing products on the start screen
You have the option of replacing the four products
on the start screen with your personal favourites.
Example:Proceed as follows to replace ‘Latte
macchiato on the start screen with ‘Latte
macchiato doppio.
Precondition:The start screen is displayed.
T Touch ‘^’ for about 2 seconds until ‘Replace
which product?’ appears in the bottom right.
T Touch ‘Latte macchiato’.
The product selector view is launched.
T Move your finger from left to right (or vice
versa) across the touchscreen display until
‘Latte macchiato doppio is displayed.
T Touch Save’.
‘Saved appears briefly on the display.
‘Latte Mac. Doppio’ is displayed in the
selected position on the start screen.
Deactivating the start screen
You can deactivate the start screen so that the
product selector view is displayed as standard.
U
‘Start screen / ‘Active
U
The start screen is displayed. You can go to
the product selector view by touching the
‘Rotary Selection’ box.

Table of Contents

Other manuals for Jura IMPRESSA A9 One Touch

Related product manuals