T Place a receptacle (at least 10 oz or 300ml)
under the hot-water spout.
T Touch ‘Next’.
‘Filter is being rinsed’, water flows out of the
hot-water spout.
E The water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically after
approximately 10 oz (300 ml).
‘Machine is heating’
Your IMPRESSA is once more ready for use.
Changing the filter
E After 2000 oz (60liters) of water have flowed
through, the filter will cease to work. Your
IMPRESSA will automatically prompt you to
change the filter.
E After three months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLEARYL Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:The start screen is displayed. The
box with the Maintenance symbol c lights up red.
T Touch‘c’.
T Touch ‘Change the filter’.
‘Change the filter’
E If you do not want to start changing the
filter just yet, press the ‘’ button.
T Touch ‘Start’.
9
T Touch ‘Start’ again.
‘Change the filter’
T Remove and empty the water tank.
T Open the filter holder and remove the old
CLEARYL Blue filter cartridge.
T Insert a new CLEARYL Blue filter cartridge
into the water tank, exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After three months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert the tank.
T Place a receptacle (at least 10 oz or 300ml)
under the hot-water spout.
T Touch ‘Next’.
‘Filter is being rinsed’, water flows out of the
hot-water spout.
E The water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically after
approximately 10 oz (300 ml).
‘Machine is heating’
Your IMPRESSA is once more ready for use.
9
To Next Page
Loading...
