20
2 Preparing and using your IMPRESSA for the first time
o T Press the Coffee button.
The grinder starts and
1 COFFEE is displayed. After this,
the coffee strength is briefly displayed.
T Turn the fineness of grind switch to the desired position
while the grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.
T Close the aroma preservation cover and the cover of the
bean container.
Precondition: Your IMPRESSA is switched on at the power switch
and the indicator light is illuminated (standby).
Q T Press the On/Off button to switch the IMPRESSA on.
HEATING is displayed.
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout.
c T Press the maintenance button.
RINSING, the machine rinses.
Preparation stops automatically.
READY appears on the
display.
When you switch your IMPRESSA off, the spouts with which a coffee
speciality or milk have been prepared are rinsed.
T Place a receptacle under the coffee spout and the frother.
Q T Press the On/Off button.
E When you prepare a milk product, but have not performed
cappuccino cleaning,
C–CLEANING appears and the main-
tenance button c lights up. For ten seconds you can start the
’Clean cappuccino frother’ procedure by pressing the mainte-
nance button.
RINSING, the coffee spout is rinsed.
RINSE RIGHT, maintenance button c lights up.
Switching on
Switching off (standby)
To Next Page
Loading...
