27
3 Familiarising yourself with the control options
g T Turn the Rotary Switch until STRENGTH is displayed.
k T Press the Rotary Switch to enter the programme item.
STRONG
g T Turn the Rotary Switch until NORMAL is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
STRENGTH
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
BUTTONS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
Under the programme item
INFO, you can query the following
information:
Z Number of the prepared coffee and milk specialities and hot
water
Z Maintenance status and number of maintenance programmes
performed (cleaning, descaling, filter change)
Z Number of performed cappuccino cleaning operations
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Press the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
INFO is displayed.
k T Press the Rotary Switch to enter the programme item.
BUTTONS
k T Press the Rotary Switch to enter the programme item.
The total number of the prepared coffee specialities is dis-
played.
E The respective number of prepared products is displayed by
pressing the individual buttons.
k T Press the Rotary Switch to exit the programme item.
BUTTONS
Query information and
maintenance status
To Next Page
Loading...
