26
3 Familiarising yourself with the control options
Settings in programming mode always follow the same model.
Example: To change the strength of one espresso from
STRONG
to
NORMAL proceed as follows:
Precondition:
READY is displayed.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
RINSE appears.
g T Turn the Rotary Switch until
BUTTONS is displayed.
k T Press the Rotary Switch to enter the programme item.
SELECT BUTTON
E Next select the product button for which you would like to
make settings. No product is prepared during this procedure.
E To enter a setting for the double product, press the corre-
sponding button twice within a period of two seconds.
i T Press the Espresso button.
WATER
Programme item Sub-item Explanation
HARDNESS (is only
displayed when the
filter is not activated)
INACTIVE,
1°dH – 30°dH
T Adjust the water hardness.
ENERGY
SAVE -,
SAVE w
T Select an energy-saving mode.
TIME --:--
T Set the time.
UNIT ON --:--
T Adjust the switch-on time.
OFF AFTER
INACTIVE
,
0.5 HRS – 15 HRS
T Set the number of hours after which the
IMPRESSA should switch off automatically.
INFO
T Keep track of all prepared coffee and
milk specialities and view the maintenance
status.
DISPLAY
ML/OZ,
24H/AM PM
T Select the unit of the amount of water
and the time format.
LANGUAGE
T Select your language.
EXIT
T Exit programming mode.
To Next Page
Loading...
