28
3 Familiarising yourself with the control options
g T Turn the Rotary Switch until CLEAN is displayed.
E Turn the Rotary Switch to switch to the performed descaling,
filter change and cappuccino cleaning operations.
k T Press the Rotary Switch to enter the programme item.
The number of performed cleaning operations appears on
the display.
E The respective maintenance status can also be displayed in
addition to the number of performed maintenance pro-
grammes. The filled out fields show the maintenance status.
Once all fields are filled out, your IMPRESSA will request the
respective maintenance programme.
k T Press the Rotary Switch to exit the programme item.
CLEAN
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
INFO
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
T Close the cover of the Rotary Switch.
To Next Page
Loading...
