JVA Z14/Z14R User Manual
13
PULSE
FEATURE
13.1
-
puts can be dangerous.
13.2
slaves.
requirement for Australian Standards.
-
-
Note:
1. Do not interconnect the energisers via the keypad bus until after they are
programmed.
2. If more than one keypad is used, they will need dierent addresses (see
“10.3.6 Changing the Keypad Messages and Address” on page 65.
3. If Perimeter Patrol is used any keypad in the system should not have address
2, (see “10.3.6 Changing the Keypad Messages and Address” on page 65).
1.
2.
3. *, 0, #.
4. Enter 2, 61#.
To Next Page
Loading...
